Pipe bender is suitable for petroleum, natural gas, chemical, electric power, construction and other industries.
We can provide email, telephone and video technical advice and support to make the bending machine easier to operate
We will test each pipe bending machine before shipment
We support TUV,SGS and other third party organizations to inspect the pipe bender
We provide very strong packaging for pipe bending machines, eliminating the trouble of customs clearance at the client end
The frame of pipe bender machine is welded with structural steel and steel plate and machined. Push plate adopts T - groove structure, smooth stroke. The push-down plate is made of gray RON plate, which is wear-resistant. With wear compensation adjustment variable
| NO. | MODE/Parameters | OD Range(mm) | Thrust(t) | Bending Radius | Bending Angle | M.F Power(kw) |
| 1 | HY-WG-219 | 60~219 | 64 | ≤20D | 0~180 | 160~200 |
| 2 | HY-WG-325 | 168~325 | 85 | ≤15D | 0~180 | 200~250 |
| 3 | HY-WG-426 | 219~426 | 106 | ≤15D | 0~180 | 300~350 |
| 4 | HY-WG-530 | 219~530 | 130 | ≤12D | 0~180 | 300~350 |
| 5 | HY-WG-610 | 325~630 | 200 | ≤12D | 0~180 | 350~400 |
| 6 | HY-WG-720 | 325~720 | 206 | ≤10D | 0~180 | 400~450 |
| 7 | HY-WG-820 | 426~820 | 258 | ≤10D | 0~180 | 450~450 |
| 8 | HY-WG-914 | 426~914 | 258 | ≤8D | 0~180 | 500~600 |
| 9 | HY-WG-1020 | 530~1020 | 300 | ≤8D | 0~180 | 600~800 |
| 10 | HY-WG-1220 | 630~1220 | 337 | ≤8D | 0~180 | 600~800 |
| 11 | HY-WG-1420 | 720~1420 | 420 | ≤6D | 0~180 | 800~1000 |
| Note: 1.The machines technical parameters is based on pope wall thickness≤20mm. | ||||||
| 2.MAX pipe wall thickness can be 150mm.Machine can be designed according to users requirements. | ||||||