Elbow Forming Machine

The elbow machine is mainly used for hot push forming of carbon steel and alloy steel elbows

Watch the video for more product information

For more product information about the bender, check out Youtebe
https://www.youtube.com/embed/mqV4tzeZbQk

Watch the video for more product information

For more product information about the bender, check out Youtebe
https://www.youtube.com/embed/77y4IY956VY

Automatic feeding

Using voltage stabilization technology, even if the incoming line voltage fluctuates by 10%, the intermediate frequency output power can still be kept stable. Energy saving, low noise and low pollution

Running stability

The elbow machine adopts hydraulic automatic feeding mechanism

 

The main mechanism of the intermediate frequency heating Elbow Forming Machine: equipment frame rail, main cylinder and support plate, movable push plate, front support plate, feeding device, intermediate frequency coil, elbow mold, mold pulling cylinder, intermediate frequency power heating device, electrical control System, hydraulic control system, operating table including touch screen film, cooling water circulation system.

Intermediate frequency heating elbow machine can produce elbow raw material steel pipe mainly: seamless steel pipe, straight seam welded spiral welded pipe and so on.

Elbow specification range: outer diameter 25-1620MM, wall thickness 3-120MM,

The angle of the elbow: 45 degrees. 90 degrees, 180 degrees, and any angle the user needs.

The radius of curvature of the elbow is: 1D-2.5D

 

NO. Model/Parameters Elbow Range(mm) Bending Radius Thrust(t) Bneding Angle M.F Power(kw) Max Working Thrust(t)
1 HY-WT-114 25~114 1~2.5D 50 0~135 160~200 42
2 HY-WT-219 108~219 1~2.5D 84 0~135 200~250 72
3 HY-WT-325 108~325 1~2.5D 106 0~135 300~350 91
4 HY-WT-426 159~426 1~2.5D 160 0~135 350~400 137
5 HY-WT-558 219~530 1~2.5D 206 0~135 400~450 177
6 HY-WT-630 325~630 1~2.5D 260 0~135 450~500 220
7 HY-WT-720 325~720 1~2.5D 300 0~135 500~600 257
8 HY-WT-820 426~820 1~2.5D 330 0~135 600~800 282
9 HY-WT-914 426~914 1~2.5D 410 0~135 600~800 351
10 HY-WT-1067 530~1020 1~2.5D 670 0~135 1000~1200 574
11 HY-WT-1220 630~1220 1~2.5D 850 0~135 1000~1200 728
12 HY-WT-1420 720~1420 1~2.5D 1050 0~135 1200~1500 900
Note: 1.The machines technical parameters is based on pipe wall thickness≤20mm。
          2.MAX pipe wall thickness can be 150mm.machine can be designed according to users requiremerta.

 

 

Contact Us

You are interested or have questions about our services? Send us an inquiry and  we will contact you shortly.

Read more!