These elbows are widely used in the connection of the industrial pipelines for the Petrochemical , gas, oil pipes, electrical power and food, etc
For more product information about the bender, check out Youtebe https://www.youtube.com/embed/c5L9zChO5VY
For more product information about the bender, check out Youtebe https://www.youtube.com/embed/fffPa-5yjH0
Medium Frequency Steel Elbow Machine has various designed ways, can be produce 2 piece of elbows in a time or support producing of elbow as well as 180 degree bend
These elbows are widely used in the connection of the industrial pipelines for the Petrochemical , gas, oil pipes, electrical power and food, etc
The intermediate frequency heating hydraulic elbow machine pusher is mainly used to produce elbow pipe fittings of various diameters and wall thicknesses with a radius of curvature of 1 to 2.5D. With the development of deep processing technology for steel pipes in our factory, this product has received comprehensive technical improvements. The equipment has integrated ultra-short stress line cone die expansion, digital control of intermediate frequency induction heating, and application of no back pressure and low energy consumption hydraulic transmission technology. Electromagnetic reversing valves are used for opening and closing of all gates, which realize dual control of the gate site and operation platform, and at the same time increase multiple operation automation technologies such as hydraulic alignment and clamping of raw steel pipes, and combine the technology of the factory's hot pipe expansion machine. Manufactured hydraulic pushing equipment such as a four-cylinder pushing machine for extra-large and thick elbow pipe fittings. After the equipment is equipped with an intermediate frequency power supply heating intelligent constant temperature control system, it can realize one-person operation and control multiple equipment, energy saving, environmental protection, safe operation and other functions.
| NO. | Model/Parameters | Elbow Range(mm) | Bending Radius | Thrust(t) | Bneding Angle | M.F Power(kw) | Max Working Thrust(t) |
| 1 | HY-WT-114 | 25~114 | 1~2.5D | 50 | 0~135 | 160~200 | 42 |
| 2 | HY-WT-219 | 108~219 | 1~2.5D | 84 | 0~135 | 200~250 | 72 |
| 3 | HY-WT-325 | 108~325 | 1~2.5D | 106 | 0~135 | 300~350 | 91 |
| 4 | HY-WT-426 | 159~426 | 1~2.5D | 160 | 0~135 | 350~400 | 137 |
| 5 | HY-WT-558 | 219~530 | 1~2.5D | 206 | 0~135 | 400~450 | 177 |
| 6 | HY-WT-630 | 325~630 | 1~2.5D | 260 | 0~135 | 450~500 | 220 |
| 7 | HY-WT-720 | 325~720 | 1~2.5D | 300 | 0~135 | 500~600 | 257 |
| 8 | HY-WT-820 | 325~720 | 1~2.5D | 330 | 0~135 | 600~800 | 282 |
| 9 | HY-WT-914 | 426~914 | 1~2.5D | 410 | 0~135 | 600~800 | 351 |
| 10 | HY-WT-1067 | 530~1020 | 1~2.5D | 670 | 0~135 | 1000~1200 | 574 |
| 11 | HY-WT-1220 | 630~1220 | 1~2.5D | 850 | 0~135 | 1000~1200 | 728 |
| 12 | HY-WT-1420 | 720~1420 | 1~2.5D | 1050 | 0~135 | 1200~1500 | 900 |
| Note: 1.The machines technical parameters is based on pipe wall thickness≤20mm。 | |||||||
| 2.MAX pipe wall thickness can be 150mm.machine can be designed according to users requiremerta. | |||||||